Views: 113 Author: Site Editor Publish Time: 2023-12-20 Origin: Site
AUDITORIUM SEATING is suitable for auditoriums, theaters, auditoriums, and lecture halls. AUDITORIUM SEATING is mostly composed of five parts: the seat, back, armrests and feet, and writing board. Under normal circumstances, the standing feet and the handrail are integrated to form a firmly installed handrail frame. The composition structure is generally steel-wood structure or steel-plastic structure or aluminum-wood structure. Next, let's take a look at the relevant information on auditorium seating.
Here is the content list:
How to distinguish the quality of the leather of AUDITORIUM SEATING.
Which type of stand should I use for fixing the AUDITORIUM SEATING?
Cinema chairs, AUDITORIUM SEATING, and car seats are generally made of leather. In particular, theater seat is a special leather, so some unscrupulous manufacturers will use other low-priced leathers to recharge. First, the certificate method: the leather of the original factory has a clear source, and the basic information such as the production place, the tannery label, the leather test table, the leather use authorization letter, etc., is indispensable. Second, the labeling method: genuine leather, the date of manufacture, the name, and the area of the leather factory, etc. will be marked on the back. (The date of manufacture should not be too long, and if the leather is more than 3 years old, you should pay attention to whether there is mildew). Third, viewing method: under a 30x magnifying glass, it can be seen that the leather surface is like the surface of the moon, with pits and holes, and its air permeability is good. Cut the leather crosswise with a blade, and it can be seen that the color of the leather from the outer layer to the inner layer must be the same. Pay attention to whether there is a different color under the outer layer, and avoid buying second-hand leather that has been dyed or changed color. Fourth, olfactory method: good leather should not have a pungent smell after processing, so too much solvent smell and paint smell is not good. Fifth, heat-resistant method: it is best to ask the manufacturer for a small piece of leather, and touch the sample with a cigarette butt for 2 to 3 seconds to avoid buying PU products. Burning with a lighter takes time because of the large contact area lengthened. Sixth, the wiping method: wipe the surface of the leather with stain removal oil, pay attention to whether there is fading and falling off, to avoid buying leather that has changed color twice.
The single foot is also called the big stance. The single foot supports the central point of the entire Church chair, and the contact surface with the air is larger than the other two stances, and it is relatively stable. Moreover, the monopod feet look very high-level, and the legs have ventilation holes, and the legs can also be used to connect with other equipment to add various functions. However, due to the complex and sophisticated manufacturing process, the requirements of the device are also very high, and the price will be relatively high. When purchasing this kind of stand, we must pay attention to whether the venue can meet the requirements. The monopod is the same as the ordinary type, which is mainly connected to the handrail. It is usually made of aluminum alloy or steel, which is elegant and beautiful. Reinforcing ribs will be added to the base of the standing foot to make the base of the standing foot more stable, the stability is very good, and the service life is longer. At the same time, due to the simple structure, the installation and fixing work is very convenient, but the price is expensive.
Ordinary feet are mainly connected with handrails. Steel or Lu alloy is often used as the basic material. The price generally depends on the material used (steel or aluminum alloy). This type of ordinary feet needs to be well maintained, otherwise, it is easy to oxidize, long-term use will lead to deformation, the service life is shorter than other legs, and the stability is worse than that of reinforced legs. In the final analysis, which seating should be used will be determined according to the seating situation. The key is to match the overall appearance and design of AUDITORIUM SEATING. Secondly, the appearance, shape, and stable structure of the product can fulfill people's requirements for comfort. This is the original aspiration of the auditorium chair.
Our official website is https://www.hongjiseating.com/. If you work with AUDITORIUM SEATING or want to know more about our company, you can communicate with us on the website.
