Factory Inspection Standard Process Of Auditorium Seating

Hongji AUDITORIUM SEATING integrates comfort, ergonomics, aesthetics, and functionality, and is widely used in various conference halls, auditoriums, concert halls, teaching classrooms, and training rooms. Hongji customizes the best AUDITORIUM SEATING solutions for our valued customers according to their final needs and building structures. Next, let's take a look at the factory inspection standard process for cinema chairs.

Here is the content list:

• What are the inspection contents of AUDITORIUM SEATING?

• What are the inspection methods of AUDITORIUM SEATING?

• What are the AUDITORIUM SEATING inspection standards?

• What are the conclusions of the AUDITORIUM SEATING test?

What are the inspection contents of AUDITORIUM SEATING?

First, AUDITORIUM SEATING dimensions: seat distance, seat height, seat depth, seat height. Second, the overall appearance of AUDITORIUM SEATING: soft package, spray, paint. Third, the overturning noise and rebound of the conference chair. Fourth, the operation of the reversible backplane is flexible and firm. Fifth, the lifting and pushing of the movable feet. Sixth, the installation, and flipping off the coffee table board or writing board. Seventh, the fit and firmness of various fasteners.

What are the inspection methods of AUDITORIUM SEATING?

First, sample 2% of each batch of products, and conduct trial assembly as required, but at least two or two groups are installed. Second, the appearance of AUDITORIUM SEATING after assembly is determined by observation. Third, measure the seat distance, AUDITORIUM SEATING height, seat depth, and hall chair for all the installed AUDITORIUM SEATING. Fourth, in the seat cushion flipping noise test, the number of flips per person shall not be less than five times. Fifth, regarding the flexibility and reliability of the back-turning test, each group shall not be less than three times. Sixth, the lifting and pushing test of the movable foot universal wheel shall not be less than three times per group. Seventh, the operational flexibility and reliability of the coffee table board and writing board shall be tested at least three times per person.

What are the AUDITORIUM SEATING inspection standards?

First, the external dimensions of AUDITORIUM SEATING are tested according to the regulations of Q/SG02-98 or the contract and ranking chart. Second, after assembly, AUDITORIUM SEATING has a neat and uniform appearance, and there are no obvious defects in fabrics, soft bags, plastic spraying, paint, and plastic shells. Thirdly, AUDITORIUM SEATING has low turning noise, the single AUDITORIUM SEATING is below 15dB, the theater chair spring is moderate, and the rebound process is suitable. Fourth, the reversible plate is flexible, firm, and without obvious obstacles, the plane can be adjusted consistently, and the slope is suitable. Fifth, the movable foot universal wheel lifts, and the whole chair push the direction. Sixth, the writing board and the coffee table board are neatly installed and flexibly flipped, the plane angle is adjusted properly, and there is no sharp burr. Seventh, all kinds of fasteners, rubbers, etc. are reasonably used and installed firmly.

What are the conclusions of the AUDITORIUM SEATING test?

First, according to the inspection method, after a comprehensive inspection of AUDITORIUM SEATING after sampling and assembly, if all of them meet the inspection standards, the whole chair of this batch of products will pass the inspection. Second, if it is found to be unqualified after correct installation and adjustment, the batch of products will be re-sampled and assembled according to 4% and tested according to the above method. If there are no unqualified products, the batch of products will be treated as qualified by the whole chair inspection. If the product requirements are very high, it is necessary to inspect each defective part. Third, if one of the resampled products is found to be unqualified, the parts related to the unqualified products will be returned to the workshop, and the workshop will conduct self-inspection and improvement. Fourth, after all the repairs and self-inspections in the workshop are qualified, notify the quality inspection department to re-organize the inspection according to the inspection standards, and the steps are the same as above. Fifth, for the products that pass the inspection, the Quality Inspection Department will issue a certificate of conformity for this batch of products.

If you are interested in our auditorium seating products or have other needs, please feel free to contact us. Our official website is https://www.hongjiseating.com/.